Woodpeckers Precision Woodworking Tools WPDPPACK1 Drill Press Table, 1-Pack

Woodpeckers Drill Press Table features a generous 16-inch by 23-inch by 1-inch surface constructed of a MDF core covered with Formica Micro-Dot laminate - a unique texture which is a grid of small dimples that collect saw dust, allowing the surface to better grip the work piece under pressure. Removable insert minimizes tear-out when drilling through material without the need of a backer board and the insert can easily be replaced with any 1/2-inch thick material. Two double-wide T-tracks are embedded and bolted in place from underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-track is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Once calibrated to your drill press, no further adjustment is needed. This package includes the Drill Press Table, standard 36-inch fence, 2 Flip Stops, 2 Hold Down Clamps and 1 Filler. Read more...

Kreg PRS1020 24-inch x 32-inch Precision Router Table Top

The Kreg PRS1020 24-inch x 32-inch Precision Router Table Top was designed to reduce vibration and noise wherever possible. The steel reinforced heavy-duty router table provides a solid, secure and quiet routing solution for any workshop. Read more...

Ryobi ZRA25RT02G 32 in. x 16 in. Intermediate Router Table (Green)

Ryobi introduces the Ryobi 32 in. x 16 in. Intermediate Router Table. This routing table makes routing jobs fast and easy. Featuring MDF sacrificial faces on its fence, the table has an adjustable fence with joining capabilities. To learn more about Ryobi tools go to Ryobitools.com and check out Ryobi Nation. See below for more information on this tool. Read more...

MLCS 9338 All-In-one Router Plate Kit

3/8-inch thick phenolic router plate supports any router. 2 removable rings give three different bit openings: (3-7/8, 2-5/8, 1-3/16-inch). Note: 1-3/16-inch opening is designed to hold Porter Cable style guide bushings. The steel starting guide pin allows routing curved work. The plate is approximately 9 -by-12-inch with pre-drilled table mounting holes. Includes magnets and adjusting screws for securing and leveling the plate. Also includes concentric rings on bottom of plate for easy alignment when installing your router. Read more...

MLCS Woodworking Router Table Top and Fence with Phenolic Plate

Router Table Top: 24" x 32", heavy 1-3/8" thick tabletop (1/4" thicker than most other tables) has a sturdy MDF core, durable melamine surface and polyethylene plastic edges. A 12" x 9" phenolic router insert is also premounted. Removable rings allow 3 different size openings (1-3/16", 2-5/8", and 4") for a great fit with most router bits. Table comes pre-installed with an aluminum miter slot to ensure accuracy and aluminum T-Track slots to mount your router fence. A guide pin is included and allows for freehand routing. Hex head adjusting screws provide a perfectly level insert to top while small magnets hold the insert in place. Threaded inserts are also provided on the bottom of the table top to mount to a leg set or cabinet. Router Fence: A 36" long anodized aluminum angle keeps the fence at 90 deg. for accuracy (machined to within .010"). High split fence constructed with an MDF core and a melamine surface, allows edge routing for safer vertical routing operations. T-slot allows the attachment of featherboards or jigs to the fence. Durable plastic safety guard helps protect eyes and face against flying woodchips. Fence faces are mounted on a T-slot, allowing for independent adjustment and varied openings around the router bit. Measuring tape on top of fence reads both right to left and left to right, allowing easy and convenient measurement. Read more...

Bench Dog 40-300 ProMax RT Complete

The ProMaxRT is the largest, flattest, most durable table available. It's the only full size cast iron table on the market with over 5 square feet of work surface - 32 x 24 x 1.25 inches thick. Weighing in at nearly 100 pounds, the ProMaxRT is the ultimate in stability, durability and accuracy.
The ProMaxRT also has an integrated dual-track with slots for miter gauges and a wide variety of accessories. For the greatest accuracy, there is a 12-point plate leveling and locking system.

The ProCabinet is a sturdy Baltic Birch cabinet with storage space and a dust port. This solid base is built to hold even the heaviest of tops, including the 97 pound ProMax.
It has an integrated 4-inch dust port that connects to a dust collection system. Measuring 33.5 x 24.75 x 19.25 inches, the ProCabinet has plenty of room for storing tools, jigs, bits or anything else. It even has 4 leveling feet. This sturdy cabinet with bolt and cross-dowel construction is built for years of use. Read more...

Bosch RA1171 Cabinet Style Router Table

Thanks to its versatile design, the RA1171 lets you work with a variety of materials while ensuring precision with every cut. With a tall aluminum fence measuring 4-7/8 x 25-1/8 inches (HxL), the table handles tall stock with ease. The fence also features adjustable MDF face plates for better support and smoother operation.
The rigid aluminum router mounting plate stays flat and true for precise, accurate cuts, and for added versatility, it's pre-drilled to fit a variety of routers.
The easy-to-use featherboards attach to the fence and table and are fully adjustable to fit a variety of workpieces. They provide additional support and control while feeding stock across the routing table. Read more...